Elevate your camping experience and make your camp feel just like home with our 4 kW Camping Stove from Camping with Stoves / Bell Tent UK.
This model not only acts as a stunning centre piece within your tent but also serves as a highly practical, portable heating solution. A resilient design tailored for adventure, the 4 kW is more than equipped to handle the great outdoors.
This heavy-duty stove resembles a designer domestic wood burner you would expect to find in the corner of a ski chalet with sharp lines and a large viewing window. Not only does this stove bring a high-end appeal to your tent, but its compact design and modular flue make it a capable travel companion.
Crafted out of thick cold pressed steel this stove retains heat and with a maximum output of 4 kW will heat large Bell Tents with ease.
Robust and mighty.
Compact it may be, but this stove is a powerhouse, delivering a substantial 4 kW of heat.
Functionality meets convenience.
When it's time to hit the road, the flue comes apart so you can pack it down and fit it into the corner of your car boot. Always make sure the stove and flue are stone cold and consider bagging them up to keep ash out of your car.
Superior cold pressed steel flue.
Our stove sets itself apart with cold-pressed steel flue pipes, providing a sturdier and safer alternative to the standard thin stainless steel pipes. These robust pipes offer even heat distribution, safeguarding the integrity of your tent's structure and materials.
Optimal Heat Control.
With a removable hot plate cover, you can expose pans directly to the flames for precise cooking control (note: indoors, always ensure this opening is covered, unless a pan is in use, to prevent the spread of fumes).
Rain Cap.
Equipped with a rain cap at the top of the flue which helps stop rain running down the inside of the flue and creating steam.
Included Flashing Kit.
Your stove comes ready for tent installation, complete with a large flashing kit (valued at £45). For initial use, we advise a preliminary burn outdoors, allowing the stove paint to set and minimise fumes.
Visual Harmony with Practicality.
As evening falls, the stove's glass window offers a soothing view of the burning flames, adding to the ambiance and allowing you to monitor the fire effortlessly.
Ready to transform your camping site into a bastion of warmth and gourmet possibilities? Our 4 kW stove is poised to become your go-to for a truly sophisticated and eminently practical outdoor living experience.
Please read our 'Safety Guide' before purchasing.
Our stove’s are covered by a twelve-month manufacturer's warranty. For more detailed information please see the stove warranty section of our website.
Contents:
- 1 x Stove
- 4 x Flue sections
- 1 x Rain cap
- 3 x Sturdy legs
- 1 x Large flashing kit
Dimensions:
- Stove box: ??cm (wide) x ??cm (deep) x ??cm (high)
- Stove height with legs: 39cm
- Legs: 13cm
- Flue sections: 100mm (diameter) x 500mm (length)
- Rain Cap: 100mm (diameter) x 200mm (length)
- Total height of stove with flue pipe: 180 cm (???)
- Flue Material: Heavy duty Cold Rolled Steel *not lightweight stainless
- Maximum total high inc. all flues and stove = 280cm
- Total weight (including flue): 29kg
Features:
- 4 kW max output
- Great for larger Bell Tents
- Thick cold rolled steel stove
- Portable with modular flue sections
- Door with large window and adjustable vent
- Remove flue pieces for your perfect height
- Fuel: Seasoned wood
Optional Extra's:
Camping with Stoves 'Heat Mat' - Safety Feature
Camping with Stoves 'Flue Section' (100 x 500mm) *Not Available Yet
*You may need additional flue sections depending on your application. The type of tent, size of tent and the position of the stove inside your tent will determine the length of flue pipe you will need for the chimney to safely exit the roof
Safety Guide:
- All our stoves are designed to be used outside or in a non-sealed structure like a tent.
- They are not designed for sealed environments like buildings or vehicles.
- Always use a CO2 alarm and have a means of putting a fire out ready to hand.
- It's essential to operate this stove with a proper flashing kit where the flue exits the tent through the roof.
- This “Flashing” needs to be correctly fitted within the structure and be not too close to the top of the stove to let some of the heat dissipate before it reaches it.
- Do not leave your burning stove unattended and ensure it's fully extinguished before sleeping.
- Moreover, position the stove on a surface that's fire-retardant to mitigate potential risks. Consider one of our heat mats or, better still, a mat on top of a piece of wood or slate to protect the ground sheet of your tent.
Attention: We are not liable for any damage stemming from improper use of the stove. Customers bear full responsibility for the stove's safe operation and correct installation.
Disclaimer:
Please note: While we stand by the high quality and craftsmanship of our stoves, we must emphasise the importance of responsible usage. We strongly advise utilising our stove in conjunction with fire-retardant canvas tents, tipis, or yurts and always in conjunction with a compatible flashing kit when integrating into a canvas shelter. It is paramount for customers to verify that the shelter in use is equipped with adequate fire-retardant properties.
Always use a vulcanised rubber flashing where the flue pipe goes through the canvas. Make sure you have a means of putting a fire out and get yourself a portable CO2 alarm.
All our camping stoves are designed for use in well-ventilated tents and structures. THEY ARE NOT DESIGNED TO BE USED INSIDE BUILDINGS OR OTHER SEALED SPACES!!
The main reason for this is some of our range have removable hot plate covers so you can get the heat directly onto the bottom of your pan. These hot plate covers let some fumes out even when closed and therefore should not be used in a sealed space.
Make sure you use a stove glove or tool when removing it, and put the pan straight over the hole to stop smoke and fumes from filling your tent. Replace directly after removing the pan and only leave it off if you are using the stove outside. Safety should always be a top priority. Never leave the stove burning unattended and ensure that it is completely extinguished before retiring for the night. Make sure it has fully cooled down before attempting to dismantle and pack the stove away.
Additionally, always position the stove on a fireproof surface to guard against stray sparks potentially damaging the groundsheet. This could be one of our heat mats or even a piece of plywood or slate. We bear no liability for any loss or damage that may arise from the stove’s use, regardless of the circumstances. In ordering any of our products you are agreeing to the terms and conditions listed above.
Our stove’s are covered by a twelve-month manufacturer's warranty. For more detailed information please see the stove warranty section of our website.